DOGOITM Wireless Dog Fence for 2 Dogs, Pet Containment System with AI Smart GPS Signal for Outdoor, Waterproof and Rechargeable Dog Collar Fence with 3 Warning Modes, Range 65-3290 FT for Most of Dogs

DOGOITM GPS WIRELESS DOG FENCE SYSTEM FOR MOST OF DOGS
GPS positioning:Accurate positioning to prevent false alarms. No need to purchase a transmitter, no need to download an App, no subscription fee, and no need to dig.

Long control range: The control distance radius is from 65 feet to 3290 feet.

Waterproof and Rechargeable: The device is designed as IPX6 waterproof, but CANNOT be immersed in water for a long time. The system takes about six hours to be fully charged, boasting up to a 50-hour battery life.

Portable: The size of the wireless fence system is 2.75*1.77*1.37inches and weighs 0.27 lbs.



How to Set Up the Wireless Dog Fence Boundary
1.Install the Contact Points
The DOGOITM dog fence system comes with three pairs of contact points. If your dog is a short-haired pet, please use the short or medium contact points. For long-haired or thick-haired dogs, please use the long contact points (the hair at the contact point can also be properly trimmed).

2.Install the Collar
Step 1: Pass the collar through the device.
Step 2: Pass the collar through the release buckle and slide it on the collar up to the proper position.
Step 3: Slide and thread the collar into the hole of the glide buckle to fix the collar length.
Step 4: Pass the excess belt through the release buckle.
Step 5: Cut off the extra collar and burn the end.

3.Position the Center Point Choose a suitable center point outdoors and then turn on the receiver. It will automatically search for satellite signals, and this process usually takes between 1-2 minutes.
4.Set Up the Distance and Warning
a. Adjust the Distance Radius of the Boundary
Press the ‘M’ key to enter the distance adjust mode. The minimum radius distance is 65ft, you can use the up and down key to adjust it to the maximum 3290ft. The adjustment value for each gear is 10ft.
b. Adjust the warning-beep, vibration and electric shock
Press the ‘M’ to enter the warning adjust mode. There are three warning modes (beep, vibration and electric shock). The beep mode is turned on by default (0-1). The vibration mode has six intensities (0-5). The electric shock has eleven intensities (0-10).
5.Test the Electric Shock
Hold the test tool against the contact points, while pressing the up and down key together for 3 seconds. The device will beep, vibrate and shock respectively. If the test tool lights up, the shock mode has been activated.
6.Place the Boundary Flags
Hold the collar and walk towards the eastern / southern / western and northern points from the center, towards the boundary until the device beeps. Slowly move the device towards the center point until it stops beeping, and place the boundary flag at this point.
Using one of the flags as a reference point, use the same method above to detect specific boundaries along the boundary range and place the additional flags.
7. Fit the Training Collar
Step 1: Start with the collar turned off and your dog standing comfortably, not sitting.
Step 2: Place the device directly under your dog’s chin, making sure that both contact points are centered and touching your dog’s neck.
.

How the Device to Work When Your Dog is Out of Range
1. When your dog is out of range the warning modes will be activated. If there are no settings in place, the device automatically defaults to a beep.
2. When the vibration and shock intensity levels have been set, the device will only beep for the first three seconds when your dog is out of range. After three seconds, the device will beep, vibrate and send electric currents at the same time (this process will last for 16 seconds).
In the event that the dog returns to the boundary within three seconds, the device will only beep and your dog will not be affected by vibration or electric shock.
3. After 16 seconds of behavior correction, the device will stop working for 30 seconds. This process will occur three times. After three corrections, if your dog is still outside the boundary points, the device will automatically stop vibration and electric shock in order to protect your dog.


Caution:
DOGOITM GPS wireless dog fence system is for OUTDOOR use only due to no GPS signals indoors, to prevent an unintended correction. Turn off or remove the device from your dog when indoors.
DOGOITM GPS wireless dog fence system is designed to be IPX6 waterproof. It’s suitable for a wet environment, but it cannot be immersed in water for a long time.
Avoid leaving the device on your dog for more than 12 hours per day.
When possible reposition the collar on your dog’s neck every 1 to 2 hours.
You may need to trim the hair in the area of the contact points. Never shave your dog’s neck, this may lead to a rash or infection.
Never connect a leash to a collar with contact points. It will cause excessive pressure on the contact points.
When using a separate collar for a leash, do not put pressure on the device.
Keep it away from children.