Stainless Steel Bidet Sprayer Kit - Easy Install Toilet Bidet Attachment for Personal Hygiene and Cleaning

No toilet paper needed. This bidet sprayer for toilet will help you clean up and protect the environment. Get one home and start improving your healthy life!  What's in the package? Bidet sprayer for toilet x 1 47.5-inch stainless steel hose x 1 Toilet seats x 2 T-shaped valve x 1 Metal wrench x 1 Hook bracket x 1 Rubber washer x 1 Waterproof tape x 1 Screw x 2 Anchor x 2 Manual x 1  How to install? Step 1:Turn off the water supply valve, then flush the toilet and hold down the handle to empty the tank completely. Step 2: Make sure there is a rubber gasket in the T-valve inlet. Step 3: Connect the toilet, T-valve and two hoses. Step 4: Install the sprayer head holder. Toilet Holder: Lift the toilet lid and slide the clamps onto the side of the tank to replace the lid. Wall Bracket: Secure the bracket to the wall using sheetrock screws and anchors. Step 5: Open the water supply valve and look at the bidet sprayer. If the connection is loose or leaking, you'll need to add some waterproof tape. If there is no leakage, the toilet bidet sprayer is installed.  Warm Tips: 1. Please make sure that the inlet of your toilet tank has a diameter of 7/8 inch (about 1.9 cm) in order to install this kit. 2. We recommend turning off the bidet sprayer when not in use to prolong the life of the sprayer and avoid accidents. 3. You can use the T-valve to adjust the water supply to a lower level so that the water pressure on the hose and sprayer is not too high. 4. Be careful not to over tighten the connection.  We care about every customer, if you have any suggestions or questions, please feel free to contact our customer service team!