PF10000639322
In stock
DIYREpair Screen Replacement for iPhone 13 Pro Max 6.7', 3D Touch Display Full Repair kit, Digitizer Assembly with Tools Set, Tempered Glass, Instruction
$64.99
- 【Compatibility】Only for iPhone 13 Pro Max, DOES NOT for 13/ 13 Pro and other iPhone Series. Please ensure your model before ordering.
- 【120Hz, COF, FHD】120Hz display delivers a fast touch response and a super smooth scrolling, with optimized refresh rate to reduce motion blur on both work and play. With ultra-narrow border technology compare with COG, higher brightness, saturation and resolution in screen.
- 【Easy Installation】Please follow our introduction step-by-step, testing it before installation, disconnect battery flex cable of your phone before install our new screen. The screen is sensitive, If you encounter any problems please do not hesitate to contact us.
- 【Replacement】30 days money back and 12 months warranty for non-human factors. Full return or replacement service without ask any questions. All of our items were tested twice and 100% working before shipping out.
- 【13years Company】Best Value=High Quality + Compatible price + Best Service=Buy Confidence.
This product is fulfilled by seller
Only for iPhone 13 Pro Max (6.7 inch), DOES NOT for 13/13 Pro and other iPhone Series.
The screen replacement is without Ear Speaker, Front Camera, Proximity Sensor, so swap them out from your old screen and install them please.
Note: Testing it before installation
1. Do not apply pressure to the inner glass panel which is near with the front camera.
2. Make sure each screw is installed back to its original hole.
3. Be gentle and cautions to the flex cable connectors when installing.
4. Please check the screen and make sure all flex cables are in good condition and there is no debris on the connector.
5. DO NOT over-bend or use excessive force to tear it.
6. Please disconnect battery flex cable of your phone before you install our new screen, this is very important. Otherwise, it will be easy for your phone to short circuit.
Problem Solution
If your phone has some problems after installed. For example, cannot turn on, no touch, flashing, darker a corner, lines on screen etc., please follow these steps:
1. Reinstall all flex cables from the motherboard and double check all flex cables are in good condition, then reconnect your battery.
Package Include:
1 x Screen Assembly
1 x High Qulity Repair Tools Set
1 x Sim Card Pin
1 x 10D Full Coverage Hardness Tempered Glass
1 x Non-Dust Cloth
1 x Detailed Repair Flowchart
1 x Waterproof Adhesive
If you have any questions, please don’t hesitate to contact seller, we will try our best to solve the problem in 24 hours. So long as the products cannot work without human factors, we will change new or full refund for you always.
Buying by confidence, your choice will be the most correct.
The screen replacement is without Ear Speaker, Front Camera, Proximity Sensor, so swap them out from your old screen and install them please.
Note: Testing it before installation
1. Do not apply pressure to the inner glass panel which is near with the front camera.
2. Make sure each screw is installed back to its original hole.
3. Be gentle and cautions to the flex cable connectors when installing.
4. Please check the screen and make sure all flex cables are in good condition and there is no debris on the connector.
5. DO NOT over-bend or use excessive force to tear it.
6. Please disconnect battery flex cable of your phone before you install our new screen, this is very important. Otherwise, it will be easy for your phone to short circuit.
Problem Solution
If your phone has some problems after installed. For example, cannot turn on, no touch, flashing, darker a corner, lines on screen etc., please follow these steps:
1. Reinstall all flex cables from the motherboard and double check all flex cables are in good condition, then reconnect your battery.
Package Include:
1 x Screen Assembly
1 x High Qulity Repair Tools Set
1 x Sim Card Pin
1 x 10D Full Coverage Hardness Tempered Glass
1 x Non-Dust Cloth
1 x Detailed Repair Flowchart
1 x Waterproof Adhesive
If you have any questions, please don’t hesitate to contact seller, we will try our best to solve the problem in 24 hours. So long as the products cannot work without human factors, we will change new or full refund for you always.
Buying by confidence, your choice will be the most correct.
| Brand Name | DIYREpair |
|---|---|
| Part Number | IP13 Pro Max |
Write Your Own Review
0
% response rate, 0
-mins response time