PF10000483740
In stock
DAOKAI OLED Display Module, 5pcs 0.96 Inch I2C IIC 128X64 Pixel Display Module Yellow Blue Two-Color Display Screen Board with Cable for Arduino for Raspberry Pi
$0.00
- Specification: Supports voltage range of 3.3V-5V DC with low power consumption.(How to use this module, you can refer to this link: https://www.youtube.com/watch?v=UmYiHTOz-5k.If your module is not working, you can refer to this link: https://www.youtube.com/watch?v=NURK5bfwdE8）
- High Resolution: 128 x 64 OLED display with a wide viewing angle of over 160°.
- Self-Luminous Display: Self-luminous display with high contrast and readability, even for tiny fonts.
- Easy to Use: Only requires two I/O ports for communication via I2C/IIC interface.
- Customizable Fonts: User-friendly font generation software for creating custom fonts.
- Wide Compatibility: Compatible with Arduino,for Raspberry Pi,for 51 MCU,for STIM 32, and more.
- Package includes: 5 x 0.96 Inch OLED Display Module (Dual Color Yellow Blue), 20 x Male to Female DuPont wires - Convenient for your connection.
This product is fulfilled by seller
This OLED display module is small, only 0.96" diagonal, it is made of 128x64 individual yellow and blue OLED pixels, each one is turn on or off by the controller chip.
Specification:
Resolution: 128X64
Number of pins: 4pin
Working voltage: 5V/3.3V
Display : Yello/Blue
Pin Definitions: GND, VCC, SCL, SDA
Ultra-low power comsumption: full screen lit 0.08W
Storage temperature: -30°~80°C
Working current: The current is about 20ma during normal operation, and the current is at the ua level during sleep.
Features:
No backlight is required, and the display unit can be self-luminous. It has ultra-high contrast, bright and clear dots, and it is easy to read even small fonts.
There are no fonts embedded in the OLED controller, users can create fonts through font generation software.
Package includes:
5 x 0.96 inch OLED Display kits (Yellow Blue Two-Color)
20 x Male to Female Dupont Wire
Specification:
Resolution: 128X64
Number of pins: 4pin
Working voltage: 5V/3.3V
Display : Yello/Blue
Pin Definitions: GND, VCC, SCL, SDA
Ultra-low power comsumption: full screen lit 0.08W
Storage temperature: -30°~80°C
Working current: The current is about 20ma during normal operation, and the current is at the ua level during sleep.
Features:
No backlight is required, and the display unit can be self-luminous. It has ultra-high contrast, bright and clear dots, and it is easy to read even small fonts.
There are no fonts embedded in the OLED controller, users can create fonts through font generation software.
Package includes:
5 x 0.96 inch OLED Display kits (Yellow Blue Two-Color)
20 x Male to Female Dupont Wire
| Brand Name | DAOKAI |
|---|---|
| Part Number | WE-DA-332 |
| Is the item dishwasher safe? | No |
| Voltage Unit | Volts |
Write Your Own Review
0
% response rate, 0
-mins response time