Smart Motion Sensor, LED Stair Lighting Kit, IP20 Rated, Level 5 Brightness and 30m Range LED Lamp Body Sensor Kit for Indoor LED Stair/Step Lamps (TX-LTK01)

Specification:
Item Type: LED Light Induction Kit
Product Model: TX-LTK01
Input Voltage: DC12V/DC24V
Output Voltage: DC12V/DC24V
Output Power: Single Step ≤15W, Total Power: ≤400W
Ports: 32
Induction Head: 2 (AB)
Protection Class: IP20
Signal Mode: Human Body Induction
Control Method: Induction Control
Control Range: Approx. 30 meter / 98.4ft
Applicable Scene: Home, hotel, bar

Package List:
1 x LED Light Induction Controller
2 x Induction Heads
2 x Coils
32 x Connectors
1 x Neutral Wire
1 x Fire Wire
1 x Sticker
4 x Screws

Note:
1. This product is low voltage DC12V‑24V. It needs to be connected to a transformer and not directly connected to AC 220V, so as not to burn out the controller.
2. Please operate the light connection under the condition of power failure. After the operation is completed, check the lamps and lines before turning on the power. If the lights or lines are not connected properly, there may be a short circuit, causing the controller port burn.
3. This product is not waterproof and fireproof, please do not immerse it in water or use it near a fire source.

Wiring Considerations:
1. The product is limited to use in indoor dry environment. Strong wind, strong heat, strong shaking and other environments may cause the sensor to fail. The sensing angle is 120 degrees, the sensing distance is 1‑3 meters, and the sensing head is the most inspirational for people.
2. Arrange the wires according to the actual project layout, which will not be affected.
3. The controller is installed according to the convenient installation location.
4. The AB sensor head needs to be fixed with screws.
5. The input power supply is based on the actual number of lamps and watts, and the power supply with the appropriate power wattage is selected.