49CC Outboard Engine Outboard Motor Boat Engine, 2-Stroke 3.5HP Fishing Boat Engine Pilot Control Drive Stabilizer, With Water-Cooled Cdi System Gas Fishing Motor
- CDI ignition system: the ignition system of outboard engine motor is a CDI ignition device. You can start the motor quickly and safely. It saves your time and is easy to use.
- Independent fin streamline design: This design can protect high-speed propeller when motor boat engine collides with underwater objects. The anti vortex plate design above the propeller can keep the water flow stable, allowing you to have a good driving experience.
- Additional fuel tank: The fishing boat engine is packaged with an additional fuel tank, which can be used to refill the engine when the engine runs out of fuel. The fuel tank allows you to travel longer distances.
- Powerful motor: The maximum output of marine motor motor is 2.5kw/3.5hp. The motor can handle harsh water and provide you with safety. If you venture into a bad river, this motor is the ideal choice.
- Good cooling effect: There is a motor vent in the canoe motor engine housing. It helps to cool the motor and has better performance. The service life of the motor vent is also very long.
Please add gear oil to the motor before use (need to buy their own gear oil), replace the gear oil after the run-in period.
Application
It is suitable for rubber boats, inflatable boats, fishing boats, sailboats, small yachts, etc.
Specifications
Type: 2-Stroke
Ignition System: CDI System
Starting System: Manual Start
Staring Carburetion System: Choke Start
Recommended Fuel: Regular Unleaded Gasoline
Speed: 12km/h(Four People)
Maximum Output: 2.5kw(3.5hp)
Full Throttle Operating Range: 4000-5000r/Min
Propeller Mark: 7-1/45-a(Inch)
The Engine And The Propeller Ratio: 2: 1
Fuel To Oil Ratio: 35:1
Gear Ratio: 27/13
Overall Length: 83cm/32.68in
Propeller Length: 18cm/7.09in
Adjustment Rod Length: 40cm/15.75in
Engine Height: 16cm/6.30in
Gross Weight: 13kg/28.66lbs
Package Size: 95*31*44cm/37.40*12.20*17.32in
Package Included
1x Outboard Motor
1x Water Pump Impeller
1x Starter
1x Funnel
1x Fuel Tank
1x English Instruction
All Tools Needed for Assembly
Notes
After in the seawater or turbid water cruising:
1. Use fresh water to clean the outboard motor.
2. Cool off the water channel with fresh water.
3. Before completely running out of cooling water, don't put the outboard motor outside. Otherwise, the water can pass the exhaust port to the air cylinder, which will cause the engine to break down.
4. The engine should deposit in places with aridity and good ventilation, avoiding exposing it directly to the sunshine.
5. Before long-term storage, you should clean out the gasoline in the fuel tank completely.
6. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.
| Brand Name | KinHall |
|---|---|
| Part Number | YJH6662 |
| Maximum Horsepower Unit | Horsepower |
| Maximum Horsepower | 3.500000 |
| Product Compliance Certificate | California Air Review Board (CARB) |
| Compliance Certification Status | Compliant |
| Regulatory Organization Name | California Environmental Protection Agency - Air Resources Board |
| Compliance Certification Value | CARB Compliance Certificate |
| Regulatory Identification | NSDOS.0384EM-005 |
| Pesticide Certification Number | NSDOS.0384EM-005 |