BJTDLLX 2 Stroke 3.5HP Outboard Motor, Outboard Motor Boat Engine, Heavy Duty Fishing Boat Engine Marine Engine with Water Cooling System Boat Motor
- 【3.5HP 2 Stroke】The 2 stroke 3.5 HP hangkai outboard is controlled by a handle, and the handle is operated by a clutch. There is no neutral gear, just idle mode or low speed mode. Adopt water cooling technology to improve the reliability of the whole machine.
- 【Main parameters】Full length: 36''; Overall width: 14.5''; Overall height: 8.5''; Beam height: 16.5 inches; Full throttle working range: 4000-5000 rpm; Maximum output: 2.5KW 3.5HP; speed : 12km/h (four people); Type: Two-stroke; Short axle: 16''; Ignition system: CDI system.
- 【Main Specifications】Starting System: Manual Start; Gaze Carburetion System: Choke Start; Prop Marking: 7-1/45-A (inch); Engine to Propeller Ratio: 2:1; Recommended Fuel: Regular Unleaded Gasoline ; Fuel Ratio: 35:1; Gear Ratio: 27/13; Package Dimensions: 38'' x 17'' x 12''); Package Weight: 26 lbs.
- 【Note】All boat engines have noise. At present, we have not tested the decibel, but the noise is the same as that of motorcycles, which is a normal phenomenon. The machine itself is light in weight and can be used on boats under 100kg, with a load of 4 people. You must have a boat motor mount or hanging plate on your boat.
- 【Wide Applications】Our outboard boat motor is installed with excellent air cooling system, allowing you to fish all day without overheating. A perfect match for inflatable boats, fishing boats, sailboats and small yachts. Better performance, quick start, multi-angle positioning motor.
Description:
Short Shaft:40cm
Overall length:92CM
Overall widteh:36.5cm
Overall height:22cm
Transom height:42cm
Full throttle perating range:4000-5000r/min
Maximum output:2.5kw(3.5HP)
Speed:10km/h
Type:2-stroke
Ignition system: CDI system
Starting system: Manual start
Staring carburetion system: Choke start
Propeller mark:7-1/45-A(inch)
The engine and the propeller ratio:2:1
Recommended fuel: Regular unleaded gasoline
Fuel to oil ratio: 35:1
Gear ratio: 27/13
Maximum speed: 10 km / h
Built-in fuel tank: 1.3L
Fuel consumption per hour: 1.5L
Announcements
After in the sea water or turbid water cruising
1.Use the fresh water cleaning the outboard motor
2.With the moderate velocity circulating the engine,cool off the water chanel with fresh water.
3.Before completely running out cooling water,don't put the outboard motor outside. Otherwise the water cam pass the exhaust port to enter the air cylinder,from that will cause the engine breakdown.
4.The engine should deposit in the aridity and ventilated well place,avoid exposing directly in the sunshine.
5.Before the long term storing,you should run out of the gasoline in the fuel tank.
Please Note:
There are two pull starter included in the parcel(one is the machine, another one for spare)
We don't supply wearing parts (pull starter)for free.
| Brand Name | BJTDLLX |
|---|---|
| Part Number | 2 Stroke 3.5HP |
| Shaft Length Decimal Value | 16.000000 |
| Shaft Length Unit | Inches |
| Maximum Horsepower Unit | Horsepower |
| Maximum Horsepower | 3.500000 |
| Fuel Capacity Unit | Liters |
| Fuel Capacity | 1.300000 |
| Item Depth Unit | Inches |
| Item Depth Front to Back | 14.500000 |
| Item Height Unit | Inches |
| Height Top to Bottom | 36.000000 |
| Item Width Unit | Inches |
| Item Width Side to Side | 8.500000 |
| Compliance Certification Status | Compliant |
| Regulatory Organization Name | California Environmental Protection Agency - Air Resources Board |
| Compliance Certification Value | CARB Compliance Certificate |
| Regulatory Identification |
|