4 stroke 6.5 HP Outboard Motor Engine, 123CC 4800W Gasoline Power Boat Motor Engine with Water Cooling CDI System, Mud Motor Kit, Water Power Equipment for Plate Stern Plate Height of 17 Inches Boat

Description

This outboard motor is made of high-quality aluminum material, which is a good choice for you to enjoy your cruise. The excellent engine performance can bring you a comfortable sailing experience, as well as convenient ignition and flame failure devices to protect your safety. All you need to do is install it in the stern of your boat, and you can enjoy a fast and easy-to-operate water journey!

Details

• Locking Handle: It locks the connection between the anechoic cover and the base and also makes it easy for you to open the housing and check the internal motor at any time.
• Cooling Water Outlet: You can determine whether the water pump is working properly by checking whether it is producing water, to promptly repair the engine if it may malfunction. 
• Ergonomic Handle: The rubberized throttle control handle increases friction and has a non-slip effect, making it easier to use.  

Specification

• Material: Aluminium Alloy, Rubber
• Color: Black
• Type: 4-stroke 6.5 HP
• Displacement: 123CC
• Gear Ratio: 2.08(27:13)
• Cylinder: 1
• Max.Output: 4.8kw
• Rotation: 5000-6000r/min
• Speed: About 5-20km/h(3.1-12.42Miles/h)
• Gear Positions: F-N-R
• Ignition System: CDI
• Cooling System: Water-cooling
• Control System: Tiller Control
• Starting System: Manual Start
• Control System: #92 Gasoline
• Recommended Lubricant: Four Stroke Lubricating Oil
• Mixing Ratio: Pure Gasoline
• Trim and Tilt System: Manual Tilt
• Fuel Consumption: About 2L/H(0.52gal/H)
• Bore Stroke: 5.9*4.5cm/2.32*1.77inch
• Shaft Length: 38.1cm/15inch
• Adaptive Transom Plate Height: ≤44cm/17.32inch
• Recommended Propeller Range: 3-7''x9''
• Joystick Length: 35cm/13.78inch 
• Handle Length: 15cm/5.9inch 
• Propeller Diameter: 17cm/6.69inch 
• Silencer Cover Size: 41*25cm/16.14*9.84inch
• Outboard Engine Height: 102cm/40.16inch
• Outboard Engine Gross Weight: 29.05kg/64.04lbs
• Outboard Engine Net Weight: 24.95kg/55lbs
• Outboard Engine Package Size: 64*38.5*111cm/25.2*15.16*43.7inch

Package Included

• 1* Outboard Engine
• 1* English User Manual
• All Accessories for Installation

Notes

1. Please note that this product must be started in water, and it is not allowed to start the engine on shore.

2. Please note that the running-in period is about 10 hours or one month. During the running-in period, do not drive with a high throttle.

3. Replace the gear oil after the running-in period, and the second replacement time is after 100 hours or about 6 months.

4. When the outboard motor is started, loosen the exhaust screw on the fuel tank cover counterclockwise. The emergency flameout rope shall be inserted, and the other end shall be placed on the wrist or belt.

5. When the motor has no water outlet, please stop using it immediately, and then check the water pump impeller or check whether the water outlet is blocked.    

6. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included. 

7. Please note that the exact speed of travel depends on the shape of your boat, weight, water, wind, and other factors.

8. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before you order.