Hakko FA430-KIT1 Fume Extraction Unit with Filters and 1 Arm Kit

Hakko FA430-KIT1 Fume Extraction Unit with Filters and 1 Arm Kit Hakko FA430-KIT1 Smoke Absorber with C1571. The Hakko FA-430 fume extraction unit is designed expressly for use at soldering stations extracting the contaminated air directly at the source. Contaminated air is captured from the workplace surrounding the soldering station by the hood or hoods and transferred to the FA-430 unit by rigid ducts and a special replacement filter notification function notifies the operator when the filter needs to be replaced. Inside the unit two filters comprising three stages of filtering remove the contaminants from the air. The purified air is then returned to the area where the FA-430 is located. The pre-filter removes coarse particles such as dust thus extending the life of the main filter. The main filter provides the greatest amount of surface area within the volume of the filter case. The standard filters contain an activated carbon element built into the filter. This filter is designed to last the life of the main filter. Quiet operation and powerful suction. Exhaust noise has been reduced without sacrificing suction performance by the addition of a silencer unit to the exhaust outlet to ensure smooth air outflow. A high-performance motor with 1500 Pa of static pressure provides powerful suction and quiet operation. Noise level dB (A) Air volume m3/min Noise level dB (A) Air volume m3/min High 53 4.7 60* 3.2* Medium 50 3.7 Low 44 2 FA430-KIT1