PF10000177992
In stock
Laboratory High-speed Homogenizer Digital Display Emulsification Homogenizer Organizer FSH-2A
$286.44
- 1. Adopting suction-type homogenizing structure (internal cutter), high speed. It can perform efficient homogenization, emulsification, extraction of trace organic compounds, fat-soluble substances, and organic solvent-soluble substances between two incompatible liquids.
- 2. It can achieve the purpose of homogenization and mixing for various animal and plant tissues.
- 3. Can rupture the cell membrane to separation, and can break the DNA strand into small molecular substances at different speeds.
- 4. Speed digital display, intuitive reading.
This product is fulfilled by seller
Motor speed: 22000RPM (Large homogenizer: 8000-18000RPM, Small homogenizer: 8000-20000RPM)
Motor power: 250W
Weight: 7KG
Instructions:
The instrument should be placed on a horizontal work surface, and the required homogenizing tools must be in place. When the power is turned on, use a cup or vessel containing water to make the plum blade submerged in water. Turn on the power switch. Quickly adjust the speed knob, no obvious metal friction sound (if there is metal friction sound, turn off the power, loosen the 6M / M tightening screw of the cutter, randomly turn the outer fixing sleeve into place, and then tighten it). Cut the plants or microorganisms to be tested into small pieces or small pieces, place them in the glassware provided with them, sandwich them in the magnet holder (sigma shape), loosen the 8M / M fixing screws holding the motor base, and slowly align them Move the mouth of the vessel down so that the homogenizer head is 2-3mm away from the bottom of the vessel, and then tighten the 8M / M screws.
Motor power: 250W
Weight: 7KG
Instructions:
The instrument should be placed on a horizontal work surface, and the required homogenizing tools must be in place. When the power is turned on, use a cup or vessel containing water to make the plum blade submerged in water. Turn on the power switch. Quickly adjust the speed knob, no obvious metal friction sound (if there is metal friction sound, turn off the power, loosen the 6M / M tightening screw of the cutter, randomly turn the outer fixing sleeve into place, and then tighten it). Cut the plants or microorganisms to be tested into small pieces or small pieces, place them in the glassware provided with them, sandwich them in the magnet holder (sigma shape), loosen the 8M / M fixing screws holding the motor base, and slowly align them Move the mouth of the vessel down so that the homogenizer head is 2-3mm away from the bottom of the vessel, and then tighten the 8M / M screws.
| Brand Name | NJBVRS |
|---|---|
| Part Number | NJBVRS |
Write Your Own Review
0
% response rate, 0
-mins response time