DIYREpair Screen Replacement for iPhone Xs Max 6.5', 3D Touch Display Full Repair kit, Digitizer Assembly with Tools Set, Tempered Glass, Instruction

Only for iPhone XS Max 6.5 inch, Not for X, XS and XR.

The screen replacement is without Ear Speaker, Front Camera, Proximity Sensor, so swap everything out from your old screen and install them please.

Note:
1. Do not apply pressure to the inner glass panel which is near with the front camera.
2. Make sure each screw is installed back to its original hole.
3. Be gentle and cautions to the flex cable connectors when installing.
4. Please check the screen and make sure all flex cables are in good condition and there is no debris on the connector.
5. DO NOT over-bend or use excessive force to tear it.
6. Please please disconnect battery flex cable of your phone before you install our new screen, this is very important. Otherwise, it will be easy for your phone to short circuit.

Problem Solution
If your phone has some problems after installed. For example, cannot turn on, no touch, flashing, lines, darker a corner on screen etc., please follow these steps:
1. Disconnect battery flex, reinstall all flex cables from the motherboard and double check all flex cable is in good condition.
2. Restart your phone: Press "Volume +" button one time first, then press "Volume -" button one time, finally, holding Power button pressed for min 15 sec, after few mins, turn on the phone. Or reconnect your battery flex.

Package Include:
1 x Screen Assembly
1 x High Qulity Repair Tools Set
1 x Sim Card Pin
1 x 10D Full Coverage Hardness Tempered Glass
1 x Non-Dust Cloth
1 x Detailed Repair Flowchart
1 x Waterproof Adhesive

If you have any questions, please don’t hesitate to contact seller, we will try our best to solve the problem. So long as the products cannot work without human factors, we will change new for you always free.

Your good comments and satisfaction is our greatest motivation. Thanks for your buying, your choice will be the most correct, don't worry.